Manufactory direct trommel vibrating screen For Sand Production Line
Introduction
Trommel screen has wide range of sizes and capacities,it is a mechanical screening machine used to separate materials.It consists of a perforated cylindrical drum that is normally elevated at an angle at the feed end,motor,reduction unit,screen frame and sealing cover.
The raw materials through the entrance of the Inlet will be pushed into the rotary drum/ cylinder sieve .raw materials in the rotary drum cylinder will be selected by the rotation of rotary drum sieve ,with the rotating of the cylinder the materials that less than the screen mesh will flow down by gravity ,the oversize materials will flow through the cylinder and discharge from outlet at the machine end.
Advantages and Features
1. Designed to fit your operation- Trommel screen can be customized to meet different capacity and working site
2. Free from pollution- Fully enclosed structure,no dust pollution,improve working conditions for operators as well
3. Variable application range-Compost,chemical,coal,plastic,recycling,metallurgy,mineral-selecting etc.
4. Superior design-Simple structure,easy maintenance,steady operation,low energy consumption
5. Less blockage-Automatic cleaning brush on the top of trommel screen to avoid the blockage
6. Screen long life span-Screen is made of 16Mn with strong strength, good abrasion resistance and high screening efficiency.
Technical Parameters
| Model | Length Range | Segment No. | Aperture Size | Power
(Kw) | Inclined Angle | Max. Material Size | Rotating Speed(rpm) |
| GTSφ600 | 2-4m | 1-2 | 5-35mm | 2.2-3 | 0-7° | 50mm | 15-18 |
| GTSφ800 | 2-5m | 1-3 | 5-40mm | 3-5.5 | 0-7° | 60mm | 15-18 |
| GTSφ1000 | 2-6m | 1-4 | 5-50mm | 4-7.5 | 0-7° | 80mm | 15-18 |
| GTSφ1200 | 3-8m | 1-4 | 5-60mm | 5.5-11 | 0-7° | 100mm | 15-18 |
| GTSφ1500 | 3-10m | 1-5 | 5-60mm | 7.5-1 5 | 0-7° | 150mm | 15-18 |
| GTSφ2000 | 4-12m | 1-5 | 5-75mm | 7.5-l 8.5 | 0-7° | 180mm | 15-18 |
| GTSφ2500 | 5-12m | 1-6 | 5-90mm | 11-l 8.5 | 0-7° | 200mm | 15-18 |
Note: the parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
| ♦ Material to be processed: | ♦ Screen deck/segment number: |
| ♦ Bulk density: t/m3 | ♦ Mesh size of every screen deck/segment: mm |
| ♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. granule size: mm | ♦ Working environment temperature: °C |
| ♦ Particle distribution percentage: | ♦ Working power supply: 3 Phase V Hz |
| ♦ Handling capacity: t/h | ♦ Quantity: sets |
|
|
Manufactory direct trommel vibrating screen For Sand Production Line Images
|
